Forge Motorsport Intercooler for Audi A4 2.0 TSI 2020 on
Product Description
FMINT26 is the Forge Motorsport option for Intercooler upgrade for the Audi A4 TFSI 2020 onwards and replaces the OEM part 8W0 145 805 AD.
The objective as always was to improve and maximise the cooling efficiency to increase the vehicles performance as well as manufacture a product to the highest standard. Utilising their highly skilled CAD Team and fabrication department Forge set to work designing an Intercooler which would occupy the original space without the need to modify the vehicle, while at the same time design a product with a greater capacity core for the optimum performance.
Utilising industry leading bar and plate design, Solidworks CAD and flow simulation design (Computational Fluid Dynamics - CFD) to develop a smooth flowing end tank design, sheet metal construction was chosen to help with heat dissipation along with its weight saving properties,The bar and plate core has over 139% more volume and an increase of frontal surface area over 38% over the stock intercooler, this Intercooler offers direct fitment with no modifications required.
Forge reached out to us for assistance in Development on this project and of course we were more than happy to obilige!
Using our vehicle and our inhouse Dimsport 4WD hydraulically linked Dyno for testing, we and the Development team at Forge saw gains of 5 BHP and 5.2 NM on a vehicle running stock software, but this only tells half the story, it’s where the gains are made that’s important, from 3000RPM is where the improvements start to happen and consistently grow all the way through to the rev limiter, this Intercooler upgrade is a welcome improvement.
Adding Stage one software and an Upgraded Exhaust System will really help unlock the full potential of the Intercooler and this Engine, IATs (Intake Air Temperatures) were logged and consistent reduction in Intake Air Temperatures were achieved.
T&Cs
All purchases on this website our subject to our Terms and Conditions. Please ensure you have read and understood these before making a purchase. If you have any questions, please feel free to contact us and we will endeavour to answer any questions you may have.
PLEASE BE AWARE: Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless type ECE 103R approved - this can be identified in either the product description and/or in the Technical Information section listed. If you have any doubt on this approval, please contact us immediately for confirmation. Fitting a De-Cat/Cat Bypass, DPF delete/bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on the road. Therefore, any such products are strictly sold as off-road or motorsport use only and NOT for road use. The vehicle should be transported from place to place via a trailer, flatbed or other recovery means.
Returns Policy
Please refer to our T&C's for information on our returns policy.
Reviews
Finance
OUR PAYMENT OPTIONS
Online we currently accept payment from the methods listed above including a wide range of finance options.
FINANCE OPTIONS
In order to get the kit you want, when you need it, without ruining the family finances we offer a highly flexible range of finance options to help you get the best products on your vehicle now rather than at the end of the season when you've saved up the cash to make the purchase. There are even interest free options which effectively spread the cost without costing you any extra.
Avon Tuning Limited is an Introducer Appointed Representative of Social Money Limited t/a Payl8r who is authorised by the FCA under Ref. Number 675283. Credit is subject to creditworthiness and affordability assessments. Missed payments may affect your credit file, future borrowing and incur fees.
Product Description
FMINT26 is the Forge Motorsport option for Intercooler upgrade for the Audi A4 TFSI 2020 onwards and replaces the OEM part 8W0 145 805 AD.
The objective as always was to improve and maximise the cooling efficiency to increase the vehicles performance as well as manufacture a product to the highest standard. Utilising their highly skilled CAD Team and fabrication department Forge set to work designing an Intercooler which would occupy the original space without the need to modify the vehicle, while at the same time design a product with a greater capacity core for the optimum performance.
Utilising industry leading bar and plate design, Solidworks CAD and flow simulation design (Computational Fluid Dynamics - CFD) to develop a smooth flowing end tank design, sheet metal construction was chosen to help with heat dissipation along with its weight saving properties,The bar and plate core has over 139% more volume and an increase of frontal surface area over 38% over the stock intercooler, this Intercooler offers direct fitment with no modifications required.
Forge reached out to us for assistance in Development on this project and of course we were more than happy to obilige!
Using our vehicle and our inhouse Dimsport 4WD hydraulically linked Dyno for testing, we and the Development team at Forge saw gains of 5 BHP and 5.2 NM on a vehicle running stock software, but this only tells half the story, it’s where the gains are made that’s important, from 3000RPM is where the improvements start to happen and consistently grow all the way through to the rev limiter, this Intercooler upgrade is a welcome improvement.
Adding Stage one software and an Upgraded Exhaust System will really help unlock the full potential of the Intercooler and this Engine, IATs (Intake Air Temperatures) were logged and consistent reduction in Intake Air Temperatures were achieved.
Delivery Info
T&Cs
All purchases on this website our subject to our Terms and Conditions. Please ensure you have read and understood these before making a purchase. If you have any questions, please feel free to contact us and we will endeavour to answer any questions you may have.
PLEASE BE AWARE: Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless type ECE 103R approved - this can be identified in either the product description and/or in the Technical Information section listed. If you have any doubt on this approval, please contact us immediately for confirmation. Fitting a De-Cat/Cat Bypass, DPF delete/bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on the road. Therefore, any such products are strictly sold as off-road or motorsport use only and NOT for road use. The vehicle should be transported from place to place via a trailer, flatbed or other recovery means.
Returns Policy
Please refer to our T&C's for information on our returns policy.
Reviews
Finance
OUR PAYMENT OPTIONS
Online we currently accept payment from the methods listed above including a wide range of finance options.
FINANCE OPTIONS
In order to get the kit you want, when you need it, without ruining the family finances we offer a highly flexible range of finance options to help you get the best products on your vehicle now rather than at the end of the season when you've saved up the cash to make the purchase. There are even interest free options which effectively spread the cost without costing you any extra.
Avon Tuning Limited is an Introducer Appointed Representative of Social Money Limited t/a Payl8r who is authorised by the FCA under Ref. Number 675283. Credit is subject to creditworthiness and affordability assessments. Missed payments may affect your credit file, future borrowing and incur fees.
