Forge Motorsport Intercooler for Hyundai i20N
Product Description
The Hyundai i20N is an impressive hot hatch with plenty of potential for being fun and fast. However, when looking at the OEM intercooler the development team at Forge were able to see that this was a weak point for those owners looking to push more power or enjoy spirited driving and track days.
The development team started with previous data from the successful Forge Hyundai MK3 i30N Intercooler, the 1.6 litre engine in the i20N shares the same design concept as the 2.0 litre in the i30N. They then hand fabricated the end tanks as a starting point to create a mock-up intercooler, allowing them understand design parameters, this was then 3D scanned, allowing the development team to fine tune and produce the biggest core with the smoothest flowing end tank design for the available space.
Forge Motorsport's industry leading bar and plate core is an increase of 113% in volumetric capacity and an increase of frontal surface area of over 57% than the OEM intercooler/Heat exchanger. FMINT28 is the largest currently available on the market. The inlet and outlet sizes have both been increased in diameter, the hot side from 50mm to 60mm giving a volumetric increase of over 44% from the OEM intercooler, and the cold side from 50mm to 63mm giving a volumetric increase of over 59% from the OEM intercooler.
In summary, a fantastic edition to your i20N wether this be tuned or in stock format!
Note - This unit replaces Hyundai part number 282702L000
T&Cs
All purchases on this website our subject to our Terms and Conditions. Please ensure you have read and understood these before making a purchase. If you have any questions, please feel free to contact us and we will endeavour to answer any questions you may have.
PLEASE BE AWARE: Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless type ECE 103R approved - this can be identified in either the product description and/or in the Technical Information section listed. If you have any doubt on this approval, please contact us immediately for confirmation. Fitting a De-Cat/Cat Bypass, DPF delete/bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on the road. Therefore, any such products are strictly sold as off-road or motorsport use only and NOT for road use. The vehicle should be transported from place to place via a trailer, flatbed or other recovery means.
Delivery & Returns
At AT Store, we understand the importance of timely delivery when it comes to your orders. Our goal is to have your products shipped on the same day we receive your order. We prioritise efficiency and strive to provide you with a seamless delivery experience.
Same-Day Shipping
We aim to dispatch your orders promptly to ensure minimal waiting time for our customers. Orders received before 15:00 (GMT) on business days will typically be processed and shipped on the same day. Orders received on weekends/holidays will be processed on the next business day.
Communication on Delays
While we make every effort to ship your orders promptly, there may be unforeseen circumstances or stock availability issues that could cause delays. In such cases, a dedicated member of our sales team will personally reach out to you to inform you of any delays and provide updates on the status of your order.
Akrapovic Products Lead Time
Please note that for Akrapovic products, there may be a lead time of up to 10 working days depending on current stock levels. Our team will inform you promptly if your order falls within this category and provide you with an estimated delivery date.
Tracking Information
Once your order has been dispatched, we will provide you with a tracking number via email. Additionally, the tracking number will be added to your order notes on our website. This allows you to easily track the progress of your delivery and stay informed about its whereabouts until it reaches your doorstep.
International Shipping
For international orders, shipping costs will be calculated and confirmed upon checkout. We work with trusted courier services to ensure reliable and efficient delivery to destinations worldwide. Rest assured, we'll provide you with all necessary information regarding shipping costs and estimated delivery times for your international orders.
We are committed to providing you with the best possible delivery service, ensuring that your orders reach you in a timely manner and in pristine condition. If you have any questions or concerns regarding our delivery process, please don't hesitate to contact us for assistance.
For information regarding Returns, please refer to our T&C's.
Email: Store@avontuning.co.uk
Phone: 01454 800 117
Reviews
Finance
OUR PAYMENT OPTIONS
Online we currently accept payment from the methods listed above including a wide range of finance options.
FINANCE OPTIONS
In order to get the kit you want, when you need it, without ruining the family finances we offer a highly flexible range of finance options to help you get the best products on your vehicle now rather than at the end of the season when you've saved up the cash to make the purchase. There are even interest free options which effectively spread the cost without costing you any extra.
Avon Tuning Limited is an Introducer Appointed Representative of Social Money Limited t/a Payl8r who is authorised by the FCA under Ref. Number 675283. Credit is subject to creditworthiness and affordability assessments. Missed payments may affect your credit file, future borrowing and incur fees.
Fitting InstructionsProduct Description
The Hyundai i20N is an impressive hot hatch with plenty of potential for being fun and fast. However, when looking at the OEM intercooler the development team at Forge were able to see that this was a weak point for those owners looking to push more power or enjoy spirited driving and track days.
The development team started with previous data from the successful Forge Hyundai MK3 i30N Intercooler, the 1.6 litre engine in the i20N shares the same design concept as the 2.0 litre in the i30N. They then hand fabricated the end tanks as a starting point to create a mock-up intercooler, allowing them understand design parameters, this was then 3D scanned, allowing the development team to fine tune and produce the biggest core with the smoothest flowing end tank design for the available space.
Forge Motorsport's industry leading bar and plate core is an increase of 113% in volumetric capacity and an increase of frontal surface area of over 57% than the OEM intercooler/Heat exchanger. FMINT28 is the largest currently available on the market. The inlet and outlet sizes have both been increased in diameter, the hot side from 50mm to 60mm giving a volumetric increase of over 44% from the OEM intercooler, and the cold side from 50mm to 63mm giving a volumetric increase of over 59% from the OEM intercooler.
In summary, a fantastic edition to your i20N wether this be tuned or in stock format!
Note - This unit replaces Hyundai part number 282702L000
Delivery Info
T&Cs
All purchases on this website our subject to our Terms and Conditions. Please ensure you have read and understood these before making a purchase. If you have any questions, please feel free to contact us and we will endeavour to answer any questions you may have.
PLEASE BE AWARE: Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless type ECE 103R approved - this can be identified in either the product description and/or in the Technical Information section listed. If you have any doubt on this approval, please contact us immediately for confirmation. Fitting a De-Cat/Cat Bypass, DPF delete/bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on the road. Therefore, any such products are strictly sold as off-road or motorsport use only and NOT for road use. The vehicle should be transported from place to place via a trailer, flatbed or other recovery means.
Delivery & Returns
At AT Store, we understand the importance of timely delivery when it comes to your orders. Our goal is to have your products shipped on the same day we receive your order. We prioritise efficiency and strive to provide you with a seamless delivery experience.
Same-Day Shipping
We aim to dispatch your orders promptly to ensure minimal waiting time for our customers. Orders received before 15:00 (GMT) on business days will typically be processed and shipped on the same day. Orders received on weekends/holidays will be processed on the next business day.
Communication on Delays
While we make every effort to ship your orders promptly, there may be unforeseen circumstances or stock availability issues that could cause delays. In such cases, a dedicated member of our sales team will personally reach out to you to inform you of any delays and provide updates on the status of your order.
Akrapovic Products Lead Time
Please note that for Akrapovic products, there may be a lead time of up to 10 working days depending on current stock levels. Our team will inform you promptly if your order falls within this category and provide you with an estimated delivery date.
Tracking Information
Once your order has been dispatched, we will provide you with a tracking number via email. Additionally, the tracking number will be added to your order notes on our website. This allows you to easily track the progress of your delivery and stay informed about its whereabouts until it reaches your doorstep.
International Shipping
For international orders, shipping costs will be calculated and confirmed upon checkout. We work with trusted courier services to ensure reliable and efficient delivery to destinations worldwide. Rest assured, we'll provide you with all necessary information regarding shipping costs and estimated delivery times for your international orders.
We are committed to providing you with the best possible delivery service, ensuring that your orders reach you in a timely manner and in pristine condition. If you have any questions or concerns regarding our delivery process, please don't hesitate to contact us for assistance.
For information regarding Returns, please refer to our T&C's.
Email: Store@avontuning.co.uk
Phone: 01454 800 117
Reviews
Finance
OUR PAYMENT OPTIONS
Online we currently accept payment from the methods listed above including a wide range of finance options.
FINANCE OPTIONS
In order to get the kit you want, when you need it, without ruining the family finances we offer a highly flexible range of finance options to help you get the best products on your vehicle now rather than at the end of the season when you've saved up the cash to make the purchase. There are even interest free options which effectively spread the cost without costing you any extra.
Avon Tuning Limited is an Introducer Appointed Representative of Social Money Limited t/a Payl8r who is authorised by the FCA under Ref. Number 675283. Credit is subject to creditworthiness and affordability assessments. Missed payments may affect your credit file, future borrowing and incur fees.
