Forge Motorsport Induction Kit for Hyundai i30N, Kona N and Veloster N
Product Description
Forge Motorsport are excited to present their industry leading intake for the Hyundai i30N, Kona N, and Veloster N. This aftermarket cold air intake system improves your Hyundai's airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine
The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The upshot to all of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai’s 2.0 engine.
As always filtration is important when developing an intake, Forge once again turned to the industry leaders and long term partners Pipercross,with over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in the ‘Hi-Flow’ range,the large filter provided flows 60% more air than the stock filter.
The intake is finished off with the unique black thermal powder coating,Hyundai boast figures of 275bhp and 278lb.ft on their standard vehicle, when tested on the Forge development vehicle on the dyno, this intake it reached figures of 296bhp and 310lb.ft!
T&Cs
All purchases on this website our subject to our Terms and Conditions. Please ensure you have read and understood these before making a purchase. If you have any questions, please feel free to contact us and we will endeavour to answer any questions you may have.
PLEASE BE AWARE: Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless type ECE 103R approved - this can be identified in either the product description and/or in the Technical Information section listed. If you have any doubt on this approval, please contact us immediately for confirmation. Fitting a De-Cat/Cat Bypass, DPF delete/bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on the road. Therefore, any such products are strictly sold as off-road or motorsport use only and NOT for road use. The vehicle should be transported from place to place via a trailer, flatbed or other recovery means.
Returns Policy
Please refer to our T&C's for information on our returns policy.
Reviews
Finance
OUR PAYMENT OPTIONS
Online we currently accept payment from the methods listed above including a wide range of finance options.
FINANCE OPTIONS
In order to get the kit you want, when you need it, without ruining the family finances we offer a highly flexible range of finance options to help you get the best products on your vehicle now rather than at the end of the season when you've saved up the cash to make the purchase. There are even interest free options which effectively spread the cost without costing you any extra.
Avon Tuning Limited is an Introducer Appointed Representative of Social Money Limited t/a Payl8r who is authorised by the FCA under Ref. Number 675283. Credit is subject to creditworthiness and affordability assessments. Missed payments may affect your credit file, future borrowing and incur fees.
Forge Motorsport Induction Kit for Hyundai i30N, Kona N and Veloster N
MPN: FMINDK28
Fitting InstructionsProduct Description
Forge Motorsport are excited to present their industry leading intake for the Hyundai i30N, Kona N, and Veloster N. This aftermarket cold air intake system improves your Hyundai's airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine
The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The upshot to all of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai’s 2.0 engine.
As always filtration is important when developing an intake, Forge once again turned to the industry leaders and long term partners Pipercross,with over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in the ‘Hi-Flow’ range,the large filter provided flows 60% more air than the stock filter.
The intake is finished off with the unique black thermal powder coating,Hyundai boast figures of 275bhp and 278lb.ft on their standard vehicle, when tested on the Forge development vehicle on the dyno, this intake it reached figures of 296bhp and 310lb.ft!
Delivery Info
T&Cs
All purchases on this website our subject to our Terms and Conditions. Please ensure you have read and understood these before making a purchase. If you have any questions, please feel free to contact us and we will endeavour to answer any questions you may have.
PLEASE BE AWARE: Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless type ECE 103R approved - this can be identified in either the product description and/or in the Technical Information section listed. If you have any doubt on this approval, please contact us immediately for confirmation. Fitting a De-Cat/Cat Bypass, DPF delete/bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on the road. Therefore, any such products are strictly sold as off-road or motorsport use only and NOT for road use. The vehicle should be transported from place to place via a trailer, flatbed or other recovery means.
Returns Policy
Please refer to our T&C's for information on our returns policy.
Reviews
Finance
OUR PAYMENT OPTIONS
Online we currently accept payment from the methods listed above including a wide range of finance options.
FINANCE OPTIONS
In order to get the kit you want, when you need it, without ruining the family finances we offer a highly flexible range of finance options to help you get the best products on your vehicle now rather than at the end of the season when you've saved up the cash to make the purchase. There are even interest free options which effectively spread the cost without costing you any extra.
Avon Tuning Limited is an Introducer Appointed Representative of Social Money Limited t/a Payl8r who is authorised by the FCA under Ref. Number 675283. Credit is subject to creditworthiness and affordability assessments. Missed payments may affect your credit file, future borrowing and incur fees.
Delivery Info
You may also like
off
